plugin: manual
name: mediacard/mmc-insert
command: removable_storage_watcher insert sdio usb scsi
description:
 PURPOSE:
     This test will check that the systems media card reader can
     detect the insertion of a Multimedia Card (MMC) media
 STEPS:
     1. Click "Test" and insert an MMC card into the reader.
        (Note: this test will time-out after 10 seconds.)
     2. Do not unplug the device after the test.
 VERIFICATION:
     The verification of this test is automated. Do not change the
     automatically selected result.

plugin: shell
name: mediacard/mmc-storage
depends: mediacard/mmc-insert
command: removable_storage_test sdio usb scsi
description:
 This test is automated and executes after the mediacard/mmc-insert
 test is run. It tests reading and writing to the MMC card.

plugin: manual
name: mediacard/mmc-remove
depends: mediacard/mmc-storage
command: removable_storage_watcher remove sdio usb scsi
description:
 PURPOSE:
     This test will check that the system correctly detects 
     the removal of the MMC card from the systems card reader.
 STEPS:
     1. Click "Test" and remove the MMC card from the reader.
        (Note: this test will time-out after 10 seconds.)
 VERIFICATION:
     The verification of this test is automated. Do not change the
     automatically selected result.

plugin: manual
name: mediacard/mmc-insert-after-suspend
depends: suspend/suspend_advanced
command: removable_storage_watcher insert sdio usb scsi
description:
 PURPOSE:
     This test will check that the systems media card reader can
     detect the insertion of an MMC card after the system has been suspended
 STEPS:
     1. Click "Test" and insert an MMC card into the reader.
        (Note: this test will time-out after 10 seconds.)
     2. Do not unplug the device after the test.
 VERIFICATION:
     The verification of this test is automated. Do not change the
     automatically selected result.

plugin: shell
name: mediacard/mmc-storage-after-suspend
depends: mediacard/mmc-insert-after-suspend
command: removable_storage_test sdio usb scsi
description:
 This test is automated and executes after the mediacard/mmc-insert-after-suspend test
 is run. It tests reading and writing to the MMC card after the system has been suspended.

plugin: manual
name: mediacard/mmc-remove-after-suspend
depends: mediacard/mmc-storage-after-suspend
command: removable_storage_watcher remove sdio usb scsi
description:
 PURPOSE:
     This test will check that the system correctly detects the removal
     of an MMC card from the systems card reader after the system has been suspended.
 STEPS:
     1. Click "Test" and remove the MMC card from the reader.
        (Note: this test will time-out after 10 seconds.)
 VERIFICATION:
     The verification of this test is automated. Do not change the
     automatically selected result.

plugin: manual
name: mediacard/sd-insert
command: removable_storage_watcher insert sdio usb scsi
description:
 PURPOSE:
     This test will check that the systems media card reader can
     detect the insertion of a Secure Digital (SD) media card
 STEPS:
     1. Click "Test" and insert an SD card into the reader.
        (Note: this test will time-out after 10 seconds.)
     2. Do not unplug the device after the test.
 VERIFICATION:
     The verification of this test is automated. Do not change the
     automatically selected result.

plugin: shell
name: mediacard/sd-storage
depends: mediacard/sd-insert
command: removable_storage_test sdio usb scsi
description:
 This test is automated and executes after the mediacard/sd-insert
 test is run. It tests reading and writing to the SD card.

plugin: manual
name: mediacard/sd-remove
depends: mediacard/sd-storage
command: removable_storage_watcher remove sdio usb scsi
description:
 PURPOSE:
     This test will check that the system correctly detects 
     the removal of an SD card from the systems card reader.
 STEPS:
     1. Click "Test" and remove the SD card from the reader.
        (Note: this test will time-out after 10 seconds.)
 VERIFICATION:
     The verification of this test is automated. Do not change the
     automatically selected result.

plugin: manual
name: mediacard/sd-insert-after-suspend
depends: suspend/suspend_advanced
command: removable_storage_watcher insert sdio usb scsi
description:
 PURPOSE:
     This test will check that the systems media card reader can
     detect the insertion of an SD card after the system has been suspended
 STEPS:
     1. Click "Test" and insert an SD card into the reader.
        (Note: this test will time-out after 10 seconds.)
     2. Do not unplug the device after the test.
 VERIFICATION:
     The verification of this test is automated. Do not change the
     automatically selected result.

plugin: shell
name: mediacard/sd-storage-after-suspend
depends: mediacard/sd-insert-after-suspend
command: removable_storage_test sdio usb scsi
description:
 This test is automated and executes after the mediacard/sd-insert-after-suspend test
 is run. It tests reading and writing to the SD card after the system has been suspended.

plugin: manual
name: mediacard/sd-remove-after-suspend
depends: mediacard/sd-storage-after-suspend
command: removable_storage_watcher remove sdio usb scsi
description:
 PURPOSE:
     This test will check that the system correctly detects 
     the removal of an SD card from the systems card reader after the system has been suspended.
 STEPS:
     1. Click "Test" and remove the SD card from the reader.
        (Note: this test will time-out after 10 seconds.)
 VERIFICATION:
     The verification of this test is automated. Do not change the
     automatically selected result.

plugin: manual
name: mediacard/sdhc-insert
command: removable_storage_watcher insert sdio usb scsi
description:
 PURPOSE:
     This test will check that the systems media card reader can
     detect the insertion of a Secure Digital High-Capacity (SDHC) media card
 STEPS:
     1. Click "Test" and insert an SDHC card into the reader.
        (Note: this test will time-out after 10 seconds.)
     2. Do not unplug the device after the test.
 VERIFICATION:
     The verification of this test is automated. Do not change the
     automatically selected result.

plugin: shell
name: mediacard/sdhc-storage
depends: mediacard/sdhc-insert
command: removable_storage_test sdio usb scsi
description:
 This test is automated and executes after the mediacard/sdhc-insert
 test is run. It tests reading and writing to the SDHC card.

plugin: manual
name: mediacard/sdhc-remove
depends: mediacard/sdhc-storage
command: removable_storage_watcher remove sdio usb scsi
description:
 PURPOSE:
     This test will check that the system correctly detects 
     the removal of an SDHC card from the systems card reader.
 STEPS:
     1. Click "Test" and remove the SDHC card from the reader.
        (Note: this test will time-out after 10 seconds.)
 VERIFICATION:
     The verification of this test is automated. Do not change the
     automatically selected result.

plugin: manual
name: mediacard/sdhc-insert-after-suspend
depends: suspend/suspend_advanced
command: removable_storage_watcher insert sdio usb scsi
description:
 PURPOSE:
     This test will check that the systems media card reader can
     detect the insertion of an SDHC media card after the system has been suspended
 STEPS:
     1. Click "Test" and insert an SDHC card into the reader.
        (Note: this test will time-out after 10 seconds.)
     2. Do not unplug the device after the test.
 VERIFICATION:
     The verification of this test is automated. Do not change the
     automatically selected result.

plugin: shell
name: mediacard/sdhc-storage-after-suspend
depends: mediacard/sdhc-insert-after-suspend
command: removable_storage_test sdio usb scsi
description:
 This test is automated and executes after the mediacard/sdhc-insert-after-suspend test
 is run. It tests reading and writing to the SDHC card after the system has been suspended.

plugin: manual
name: mediacard/sdhc-remove-after-suspend
depends: mediacard/sdhc-storage-after-suspend
command: removable_storage_watcher remove sdio usb scsi
description:
 PURPOSE:
     This test will check that the system correctly detects the removal
     of an SDHC card from the systems card reader after the system has been suspended.
 STEPS:
     1. Click "Test" and remove the SDHC card from the reader.
        (Note: this test will time-out after 10 seconds.)
 VERIFICATION:
     The verification of this test is automated. Do not change the
     automatically selected result.

plugin: manual
name: mediacard/cf-insert
command: removable_storage_watcher insert sdio usb scsi
description:
 PURPOSE:
     This test will check that the systems media card reader can
     detect the insertion of a Compact Flash (CF) media card
 STEPS:
     1. Click "Test" and insert a CF card into the reader.
        (Note: this test will time-out after 10 seconds.)
     2. Do not unplug the device after the test.
 VERIFICATION:
     The verification of this test is automated. Do not change the
     automatically selected result.

plugin: shell
name: mediacard/cf-storage
depends: mediacard/cf-insert
command: removable_storage_test sdio usb scsi
description:
 This test is automated and executes after the mediacard/cf-insert
 test is run. It tests reading and writing to the CF card.

plugin: manual
name: mediacard/cf-remove
depends: mediacard/cf-storage
command: removable_storage_watcher remove sdio usb scsi
description:
 PURPOSE:
     This test will check that the system correctly detects 
     the removal of a CF card from the systems card reader.
 STEPS:
     1. Click "Test" and remove the CF card from the reader.
        (Note: this test will time-out after 10 seconds.)
 VERIFICATION:
     The verification of this test is automated. Do not change the
     automatically selected result.

plugin: manual
name: mediacard/cf-insert-after-suspend
depends: suspend/suspend_advanced
command: removable_storage_watcher insert sdio usb scsi
description:
 PURPOSE:
     This test will check that the systems media card reader can
     detect the insertion of a CF card after the system has been suspended
 STEPS:
     1. Click "Test" and insert a CF card into the reader.
        (Note: this test will time-out after 10 seconds.)
     2. Do not unplug the device after the test.
 VERIFICATION:
     The verification of this test is automated. Do not change the
     automatically selected result.

plugin: shell
name: mediacard/cf-storage-after-suspend
depends: mediacard/cf-insert-after-suspend
command: removable_storage_test sdio usb scsi
description:
 This test is automated and executes after the mediacard/cf-insert-after-suspend test
 is run. It tests reading and writing to the CF card after the system has been suspended.

plugin: manual
name: mediacard/cf-remove-after-suspend
depends: mediacard/cf-storage-after-suspend
command: removable_storage_watcher remove sdio usb scsi
description:
 PURPOSE:
     This test will check that the system correctly detects the removal
     of a CF card from the systems card reader after the system has been suspended.
 STEPS:
     1. Click "Test" and remove the CF card from the reader.
        (Note: this test will time-out after 10 seconds.)
 VERIFICATION:
     The verification of this test is automated. Do not change the
     automatically selected result.
