Package: libpam-runtime
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 300
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: pam
Version: 1.1.8-3.1ubuntu3
Replaces: libpam0g-dev, libpam0g-util
Depends: debconf (>= 0.5) | debconf-2.0, debconf (>= 1.5.19) | cdebconf, libpam-modules (>= 1.0.1-6)
Conflicts: libpam0g-util
Conffiles:
 /etc/pam.conf 87fc76f18e98ee7d3848f6b81b3391e5
 /etc/pam.d/other 31aa7f2181889ffb00b87df4126d1701
Description: Runtime support for the PAM library
 Contains configuration files and  directories required for
 authentication  to work on Debian systems.  This package is required
 on almost all installations.
Homepage: http://pam.sourceforge.net/
Original-Maintainer: Steve Langasek <vorlon@debian.org>

Package: libncurses5
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 440
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: same
Source: ncurses
Version: 5.9+20140712-2ubuntu2
Depends: libtinfo5 (= 5.9+20140712-2ubuntu2), libc6 (>= 2.15)
Pre-Depends: multiarch-support, libtinfo5 (>= 5.9-3)
Recommends: libgpm2
Description: shared libraries for terminal handling
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared libraries necessary to run programs
 compiled with ncurses.
Homepage: http://invisible-island.net/ncurses/
Original-Maintainer: Craig Small <csmall@debian.org>

Package: libaudit1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 172
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: same
Source: audit
Version: 1:2.3.7-1ubuntu2
Depends: libaudit-common (>= 1:2.3.7-1ubuntu2), libc6 (>= 2.8)
Pre-Depends: multiarch-support
Description: Dynamic library for security auditing
 The audit-libs package contains the dynamic libraries needed for
 applications to use the audit framework. It is used to monitor systems for
 security related events.
Homepage: http://people.redhat.com/sgrubb/audit/
Original-Maintainer: Laurent Bigonville <bigon@debian.org>

Package: readline-common
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 110
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: readline6
Version: 6.3-8ubuntu1
Replaces: libreadline-common, libreadline4 (<< 4.3-16), libreadline5 (<< 5.0-11)
Depends: dpkg (>= 1.15.4) | install-info
Suggests: readline-doc
Conflicts: libreadline-common, libreadline5 (<< 5.0-11)
Description: GNU readline and history libraries, common files
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: makedev
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 125
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 2.3.1-93ubuntu1
Depends: base-passwd (>= 3.0.4)
Conflicts: udev (<= 0.024-7)
Description: creates device files in /dev
 The MAKEDEV executable is used to create device files, often in /dev.
 .
 Device files are special files through which applications can interact
 with hardware.
 .
 This package is not necessary for most modern Linux systems, where the udev
 subsystem provides a more dynamic mechanism for device file management.
Original-Maintainer: Debian QA Group <packages@qa.debian.org>

Package: libtinfo5
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 512
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: same
Source: ncurses
Version: 5.9+20140712-2ubuntu2
Replaces: libncurses5 (<< 5.9-3)
Depends: libc6 (>= 2.15)
Pre-Depends: multiarch-support
Breaks: dialog (<< 1.2-20130523)
Description: shared low-level terminfo library for terminal handling
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared low-level terminfo library.
Homepage: http://invisible-island.net/ncurses/
Original-Maintainer: Craig Small <csmall@debian.org>

Package: perl-base
Essential: yes
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 5605
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Source: perl
Version: 5.20.2-2
Replaces: libfile-path-perl, libfile-temp-perl, libio-socket-ip-perl, libperl5.8 (<< 5.8.0-20), libscalar-list-utils-perl, libsocket-perl, libxsloader-perl, perl (<< 5.10.1-12), perl-modules (<< 5.20.1-3)
Provides: libfile-path-perl, libfile-temp-perl, libio-socket-ip-perl, libscalar-list-utils-perl, libsocket-perl, libxsloader-perl, perl5-base, perlapi-5.20.0, perlapi-5.20.1, perlapi-5.20.2
Pre-Depends: libc6 (>= 2.11), dpkg (>= 1.17.17)
Suggests: perl
Breaks: autoconf2.13 (<< 2.13-45), libalien-wxwidgets-perl (<< 0.65+dfsg-2), libanyevent-perl (<< 7.070-2), libcommon-sense-perl (<< 3.72-2~), libfile-path-perl (<< 2.09), libfile-spec-perl (<< 3.4801), libfile-temp-perl (<< 0.2304), libgtk2-perl-doc (<< 2:1.2491-4), libio-socket-ip-perl (<< 0.29), libjcode-perl (<< 2.13-3), libmarc-charset-perl (<< 1.2), libscalar-list-utils-perl (<< 1:1.38), libsocket-perl (<< 2.013), libxsloader-perl (<< 0.17), pdl (<< 1:2.007-4), perl (<< 5.20.0~)
Conflicts: defoma (<< 0.11.12), doc-base (<< 0.10.3), mono-gac (<< 2.10.8.1-3), safe-rm (<< 0.8), update-inetd (<< 4.41)
Description: minimal Perl system
 Perl is a scripting language used in many system scripts and utilities.
 .
 This package provides a Perl interpreter and the small subset of the
 standard run-time library required to perform basic tasks. For a full
 Perl installation, install "perl" (and its dependencies, "perl-modules"
 and "perl-doc").
Original-Maintainer: Niko Tyni <ntyni@debian.org>
Homepage: http://dev.perl.org/perl5/

Package: libudev1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 206
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: same
Source: systemd
Version: 219-7ubuntu3
Depends: libc6 (>= 2.17)
Pre-Depends: multiarch-support
Description: libudev shared library
 This library provides access to udev device information.
Homepage: http://www.freedesktop.org/wiki/Software/systemd
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>

Package: libattr1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 55
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: same
Source: attr
Version: 1:2.4.47-2
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Conflicts: attr (<< 2.0.0)
Description: Extended attribute shared library
 Contains the runtime environment required by programs that make use
 of extended attributes.
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Homepage: http://savannah.nongnu.org/projects/attr/

Package: libss2
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 157
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: same
Source: e2fsprogs
Version: 1.42.12-1ubuntu2
Replaces: e2fsprogs (<< 1.34-1)
Depends: libcomerr2, libc6 (>= 2.17)
Pre-Depends: multiarch-support
Description: command-line interface parsing library
 libss provides a simple command-line interface parser which will
 accept input from the user, parse the command into an argv argument
 vector, and then dispatch it to a handler function.
 .
 It was originally inspired by the Multics SubSystem library.
Homepage: http://e2fsprogs.sourceforge.net
Original-Maintainer: Theodore Y. Ts'o <tytso@mit.edu>

Package: liblzma5
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 316
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: same
Source: xz-utils
Version: 5.1.1alpha+20120614-2ubuntu2
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: XZ-format compression library
 XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm
 compression format, which provides memory-hungry but powerful
 compression (often better than bzip2) and fast, easy decompression.
 .
 The native format of liblzma is XZ; it also supports raw (headerless)
 streams and the older LZMA format used by lzma. (For 7-Zip's related
 format, use the p7zip package instead.)
Homepage: http://tukaani.org/xz/
Original-Maintainer: Jonathan Nieder <jrnieder@gmail.com>

Package: libpam-modules-bin
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 640
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: foreign
Source: pam
Version: 1.1.8-3.1ubuntu3
Replaces: libpam-modules (<< 1.1.3-8)
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.4), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32)
Description: Pluggable Authentication Modules for PAM - helper binaries
 This package contains helper binaries used by the standard set of PAM
 modules in the libpam-modules package.
Homepage: http://pam.sourceforge.net/
Original-Maintainer: Steve Langasek <vorlon@debian.org>

Package: grep
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 440
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: foreign
Version: 2.20-4.1
Provides: rgrep
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.4)
Suggests: libpcre3 (>= 7.7)
Conflicts: rgrep
Description: GNU grep, egrep and fgrep
 'grep' is a utility to search for text in files; it can be used from the
 command line or in scripts.  Even if you don't want to use it, other packages
 on your system probably will.
 .
 The GNU family of grep utilities may be the "fastest grep in the west".
 GNU grep is based on a fast lazy-state deterministic matcher (about
 twice as fast as stock Unix egrep) hybridized with a Boyer-Moore-Gosper
 search for a fixed string that eliminates impossible text from being
 considered by the full regexp matcher without necessarily having to
 look at every character. The result is typically many times faster
 than Unix grep or egrep. (Regular expressions containing backreferencing
 will run more slowly, however.)
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Homepage: http://www.gnu.org/software/grep/

Package: base-passwd
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 286
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: powerpc
Multi-Arch: foreign
Version: 3.5.37
Replaces: base
Depends: libc6 (>= 2.8), libdebconfclient0 (>= 0.145)
Recommends: debconf (>= 0.5) | debconf-2.0
Description: Debian base system master password and group files
 These are the canonical master copies of the user database files
 (/etc/passwd and /etc/group), containing the Debian-allocated user and
 group IDs. The update-passwd tool is provided to keep the system databases
 synchronized with these master files.

Package: e2fslibs
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 501
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: same
Source: e2fsprogs
Version: 1.42.12-1ubuntu2
Replaces: e2fsprogs (<< 1.34-1)
Provides: libe2p2, libext2fs2
Depends: libc6 (>= 2.17)
Pre-Depends: multiarch-support
Description: ext2/ext3/ext4 file system libraries
 The ext2, ext3 and ext4 file systems are successors of the original ext
 ("extended") file system. They are the main file system types used for
 hard disks on Debian and other Linux systems.
 .
 This package provides the ext2fs and e2p libraries, for userspace software
 that directly accesses extended file systems. Programs that use libext2fs
 include e2fsck, mke2fs, and tune2fs. Programs that use libe2p include
 dumpe2fs, chattr, and lsattr.
Homepage: http://e2fsprogs.sourceforge.net
Original-Maintainer: Theodore Y. Ts'o <tytso@mit.edu>

Package: debianutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 277
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: foreign
Version: 4.4
Replaces: manpages-pl (<< 1:0.5)
Depends: sensible-utils
Pre-Depends: libc6 (>= 2.15)
Description: Miscellaneous utilities specific to Debian
 This package provides a number of small utilities which are used
 primarily by the installation scripts of Debian packages, although
 you may use them directly.
 .
 The specific utilities included are:
 add-shell installkernel ischroot remove-shell run-parts savelog
 tempfile which
Original-Maintainer: Clint Adams <clint@debian.org>

Package: libgcrypt20
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 798
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: same
Version: 1.6.2-4ubuntu2
Depends: libc6 (>= 2.15), libgpg-error0 (>= 1.14)
Pre-Depends: multiarch-support
Suggests: rng-tools
Description: LGPL Crypto library - runtime library
 libgcrypt contains cryptographic functions.  Many important free
 ciphers, hash algorithms and public key signing algorithms have been
 implemented:
 .
 Arcfour, Blowfish, CAST5, DES, AES, Twofish, Serpent, rfc2268 (rc2), SEED,
 Camellia, IDEA, Salsa, CRC, MD4, MD5, RIPE-MD160, SHA-1, SHA-256, SHA-512,
 Tiger, Whirlpool, DSA, DSA2, ElGamal, RSA, ECC.
Homepage: http://directory.fsf.org/project/libgcrypt/
Original-Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>

Package: libncursesw5
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 574
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: same
Source: ncurses
Version: 5.9+20140712-2ubuntu2
Depends: libtinfo5 (= 5.9+20140712-2ubuntu2), libc6 (>= 2.15)
Pre-Depends: multiarch-support
Recommends: libgpm2
Description: shared libraries for terminal handling (wide character support)
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared libraries necessary to run programs
 compiled with ncursesw, which includes support for wide characters.
Homepage: http://invisible-island.net/ncurses/
Original-Maintainer: Craig Small <csmall@debian.org>

Package: bash
Essential: yes
Status: install ok installed
Priority: required
Section: shells
Installed-Size: 1484
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: foreign
Version: 4.3-11ubuntu2
Replaces: bash-completion (<< 20060301-0), bash-doc (<= 2.05-1)
Depends: base-files (>= 2.1.12), debianutils (>= 2.15)
Pre-Depends: dash (>= 0.5.5.1-2.2), libc6 (>= 2.15), libtinfo5
Recommends: bash-completion (>= 20060301-0)
Suggests: bash-doc
Conflicts: bash-completion (<< 20060301-0)
Conffiles:
 /etc/bash.bashrc d80b5c72ee089f1e43de3f084a69495c
 /etc/skel/.profile ecb6d3479ac3823f1da7f314d871989b
 /etc/skel/.bash_logout 22bfb8c1dd94b5f3813a2b25da67463f
 /etc/skel/.bashrc 5b16bc9ce38c73014cf3ad617d442495
Description: GNU Bourne Again SHell
 Bash is an sh-compatible command language interpreter that executes
 commands read from the standard input or from a file.  Bash also
 incorporates useful features from the Korn and C shells (ksh and csh).
 .
 Bash is ultimately intended to be a conformant implementation of the
 IEEE POSIX Shell and Tools specification (IEEE Working Group 1003.2).
 .
 The Programmable Completion Code, by Ian Macdonald, is now found in
 the bash-completion package.
Homepage: http://tiswww.case.edu/php/chet/bash/bashtop.html
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: libuuid1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 173
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: same
Source: util-linux
Version: 2.25.2-4ubuntu2
Replaces: e2fsprogs (<< 1.34-1)
Depends: passwd, libc6 (>= 2.4)
Pre-Depends: multiarch-support
Recommends: uuid-runtime
Description: Universally Unique ID library
 The libuuid library generates and parses 128-bit universally unique
 ids (UUIDs).  A UUID is an identifier that is unique across both
 space and time, with respect to the space of all UUIDs.  A UUID can
 be used for multiple purposes, from tagging objects with an extremely
 short lifetime, to reliably identifying very persistent objects
 across a network.
 .
 See RFC 4122 for more information.
Original-Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>

Package: libdb5.3
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 1788
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: same
Source: db5.3
Version: 5.3.28-9
Depends: libc6 (>= 2.17)
Pre-Depends: multiarch-support
Description: Berkeley v5.3 Database Libraries [runtime]
 This is the runtime package for programs that use the v5.3 Berkeley
 database library.
Original-Maintainer: Debian Berkeley DB Group <pkg-db-devel@lists.alioth.debian.org>
Homepage: http://www.oracle.com/technology/software/products/berkeley-db/index.html

Package: libcap2-bin
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 102
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: foreign
Source: libcap2
Version: 1:2.24-6
Depends: libc6 (>= 2.4), libcap2 (>= 1:2.10)
Recommends: libpam-cap
Description: POSIX 1003.1e capabilities (utilities)
 Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities
 available in Linux kernels. These capabilities are a partitioning of the all
 powerful root privilege into a set of distinct privileges.
 .
 This package contains additional utilities.
Original-Maintainer: Christian Kastner <debian@kvr.at>
Homepage: http://sites.google.com/site/fullycapable/

Package: debconf
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 604
Maintainer: Colin Watson <cjwatson@ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 1.5.55ubuntu2
Replaces: debconf-tiny
Provides: debconf-2.0
Pre-Depends: perl-base (>= 5.6.1-4)
Recommends: apt-utils (>= 0.5.1), debconf-i18n
Suggests: debconf-doc, debconf-utils, whiptail | dialog | gnome-utils, libterm-readline-gnu-perl, libgtk2-perl (>= 1:1.130), libnet-ldap-perl, perl, libqtgui4-perl, libqtcore4-perl
Conflicts: apt (<< 0.3.12.1), cdebconf (<< 0.96), debconf-tiny, debconf-utils (<< 1.3.22), dialog (<< 0.9b-20020814-1), menu (<= 2.1.3-1), whiptail (<< 0.51.4-11), whiptail-utf8 (<= 0.50.17-13)
Conffiles:
 /etc/apt/apt.conf.d/70debconf 7e9d09d5801a42b4926b736b8eeabb73
 /etc/bash_completion.d/debconf 8fa1862734fbe54d7178aaaa419f5a11
 /etc/debconf.conf 8c0619be413824f1fc7698cee0f23811
Description: Debian configuration management system
 Debconf is a configuration management system for debian packages. Packages
 use Debconf to ask questions when they are installed.
Original-Maintainer: Debconf Developers <debconf-devel@lists.alioth.debian.org>

Package: zlib1g
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 178
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: same
Source: zlib
Version: 1:1.2.8.dfsg-2ubuntu1
Provides: libz1
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Breaks: libxml2 (<< 2.7.6.dfsg-2), texlive-binaries (<< 2009-12)
Conflicts: zlib1 (<= 1:1.0.4-7)
Description: compression library - runtime
 zlib is a library implementing the deflate compression method found
 in gzip and PKZIP.  This package includes the shared library.
Homepage: http://zlib.net/
Original-Maintainer: Mark Brown <broonie@debian.org>

Package: hostname
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 69
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Version: 3.15ubuntu2
Replaces: nis (<< 3.17-30)
Pre-Depends: libc6 (>= 2.4)
Breaks: nis (<< 3.17-30)
Conffiles:
 /etc/init/hostname.conf 2521555e6850a6ee2461a4444b4c1d0d
 /etc/init/hostname.sh.conf 5fd24ea35befe5d66bf8ff80b612e3f2
Description: utility to set/show the host name or domain name
 This package provides commands which can be used to display the system's
 DNS name, and to display or set its hostname or NIS domain name.
Original-Maintainer: Debian Hostname Team <hostname-devel@lists.alioth.debian.org>

Package: multiarch-support
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 223
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: foreign
Source: glibc
Version: 2.21-0ubuntu4
Depends: libc6 (>= 2.3.6-2)
Description: Transitional package to ensure multiarch compatibility
 This is a transitional package used to ensure multiarch support is present
 in ld.so before unpacking libraries to the multiarch directories.  It can
 be removed once nothing on the system depends on it.
Homepage: http://www.gnu.org/software/libc/libc.html
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>

Package: tzdata
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 1560
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 2015c-1
Replaces: libc0.1, libc0.3, libc6, libc6.1
Provides: tzdata-jessie
Depends: debconf (>= 0.5) | debconf-2.0
Description: time zone and daylight-saving time data
 This package contains data required for the implementation of
 standard local time for many representative locations around the
 globe. It is updated periodically to reflect changes made by
 political bodies to time zone boundaries, UTC offsets, and
 daylight-saving rules.
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Homepage: http://www.iana.org/time-zones

Package: init
Essential: yes
Status: install ok installed
Priority: required
Section: metapackages
Installed-Size: 30
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: foreign
Source: init-system-helpers
Version: 1.22ubuntu11
Pre-Depends: systemd-sysv | upstart-sysv
Description: System-V-like init utilities - metapackage
 This package is an essential metapackage which allows you to select from
 the available init systems in Ubuntu (systemd or upstart) while
 ensuring that one of these is available on the system at all times.
Original-Maintainer: pkg-systemd-maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>

Package: systemd-sysv
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 84
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: foreign
Source: systemd
Version: 219-7ubuntu3
Replaces: sysvinit (<< 2.88dsf-44~), sysvinit-core, upstart (<< 1.13.2-0ubuntu10~), upstart-sysv
Pre-Depends: systemd
Conflicts: sysvinit-core, upstart (<< 1.13.2-0ubuntu10~), upstart-sysv
Description: system and service manager - SysV links
 systemd is a system and service manager for Linux. It provides aggressive
 parallelization capabilities, uses socket and D-Bus activation for starting
 services, offers on-demand starting of daemons, keeps track of processes
 using Linux control groups, supports snapshotting and restoring of the system
 state, maintains mount and automount points and implements an elaborate
 transactional dependency-based service control logic.
 .
 systemd is compatible with SysV and LSB init scripts and can work as a
 drop-in replacement for sysvinit.
 .
 This package provides the manual pages and links needed for systemd
 to replace sysvinit. Installing systemd-sysv will overwrite /sbin/init with a
 link to systemd.
Homepage: http://www.freedesktop.org/wiki/Software/systemd
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>

Package: mawk
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 194
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: foreign
Version: 1.3.3-17ubuntu2
Provides: awk
Pre-Depends: libc6 (>= 2.11)
Description: a pattern scanning and text processing language
 Mawk is an interpreter for the AWK Programming Language. The AWK
 language is useful for manipulation of data files, text retrieval and
 processing, and for prototyping and experimenting with algorithms. Mawk
 is a new awk meaning it implements the AWK language as defined in Aho,
 Kernighan and Weinberger, The AWK Programming Language, Addison-Wesley
 Publishing, 1988. (Hereafter referred to as the AWK book.) Mawk conforms
 to the POSIX 1003.2 (draft 11.3) definition of the AWK language
 which contains a few features not described in the AWK book, and mawk
 provides a small number of extensions.
 .
 Mawk is smaller and much faster than gawk. It has some compile-time
 limits such as NF = 32767 and sprintf buffer = 1020.
Original-Maintainer: Steve Langasek <vorlon@debian.org>

Package: gzip
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 239
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Version: 1.6-4ubuntu1
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.17)
Suggests: less
Description: GNU compression utilities
 This package provides the standard GNU file compression utilities, which
 are also the default compression tools for Debian.  They typically operate
 on files with names ending in '.gz', but can also decompress files ending
 in '.Z' created with 'compress'.
Original-Maintainer: Bdale Garbee <bdale@gag.com>

Package: gpgv
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 476
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: foreign
Source: gnupg
Version: 1.4.18-7ubuntu1
Depends: libbz2-1.0, libc6 (>= 2.4), zlib1g (>= 1:1.1.4)
Suggests: gnupg
Description: GNU privacy guard - signature verification tool
 GnuPG is GNU's tool for secure communication and data storage.
 .
 gpgv is a stripped-down version of gnupg which is only able to check
 signatures.  It is smaller than the full-blown gnupg and uses a
 different (and simpler) way to check that the public keys used to
 make the signature are trustworthy.
Homepage: http://www.gnupg.org
Original-Maintainer: Debian GnuPG-Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>

Package: libcap2
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 60
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: same
Version: 1:2.24-6
Depends: libc6 (>= 2.8)
Pre-Depends: multiarch-support
Description: POSIX 1003.1e capabilities (library)
 Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities
 available in Linux kernels. These capabilities are a partitioning of the all
 powerful root privilege into a set of distinct privileges.
 .
 This package contains the shared library.
Original-Maintainer: Christian Kastner <debian@kvr.at>
Homepage: http://sites.google.com/site/fullycapable/

Package: bsdutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 470
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: foreign
Source: util-linux (2.25.2-4ubuntu2)
Version: 1:2.25.2-4ubuntu2
Pre-Depends: libc6 (>= 2.15), libsystemd0
Recommends: bsdmainutils
Description: basic utilities from 4.4BSD-Lite
 This package contains the bare minimum of BSD utilities needed for a
 Debian system: logger, renice, script, scriptreplay, and wall. The
 remaining standard BSD utilities are provided by bsdmainutils.
Original-Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>

Package: dash
Essential: yes
Status: install ok installed
Priority: required
Section: shells
Installed-Size: 239
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Version: 0.5.7-4ubuntu1
Depends: debianutils (>= 2.15), dpkg (>= 1.15.0)
Pre-Depends: libc6 (>= 2.11)
Description: POSIX-compliant shell
 The Debian Almquist Shell (dash) is a POSIX-compliant shell derived
 from ash.
 .
 Since it executes scripts faster than bash, and has fewer library
 dependencies (making it more robust against software or hardware
 failures), it is used as the default system shell on Debian systems.
Homepage: http://gondor.apana.org.au/~herbert/dash/
Original-Maintainer: Gerrit Pape <pape@smarden.org>

Package: gnupg
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 1728
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: foreign
Version: 1.4.18-7ubuntu1
Depends: gpgv, libbz2-1.0, libc6 (>= 2.15), libreadline6 (>= 6.0), libusb-0.1-4 (>= 2:0.1.12), zlib1g (>= 1:1.1.4)
Suggests: gnupg-curl, gnupg-doc, libpcsclite1, parcimonie, xloadimage | imagemagick | eog
Description: GNU privacy guard - a free PGP replacement
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC 4880.
 .
 GnuPG 1.4 is the standalone, non-modularized series. In contrast to
 the version 2 series, shipped with the gnupg2 package, it comes
 with no support for S/MIME and some other tools useful for desktop
 environments, but also with less dependencies.
 .
 The gnupg package is built without libcurl. So it does not support
 HKPS keyservers. Install the gnupg-curl package if you want to use
 the keyserver helper tools built with libcurl and supporting HKPS.
Homepage: http://www.gnupg.org
Original-Maintainer: Debian GnuPG-Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>

Package: mount
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 591
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: foreign
Source: util-linux
Version: 2.25.2-4ubuntu2
Pre-Depends: libc6 (>= 2.17), libmount1 (>= 2.25), libsmartcols1 (>= 2.25), libudev1 (>= 183)
Suggests: nfs-common (>= 1:1.1.0-13)
Description: Tools for mounting and manipulating filesystems
 This package provides the mount(8), umount(8), swapon(8),
 swapoff(8), and losetup(8) commands.
Original-Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>

Package: libsystemd0
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 271
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: same
Source: systemd
Version: 219-7ubuntu3
Pre-Depends: libc6 (>= 2.17), libgcrypt20 (>= 1.6.1), liblzma5 (>= 5.1.1alpha+20120614), multiarch-support
Description: systemd utility library
 The libsystemd0 library provides interfaces to various systemd components.
Homepage: http://www.freedesktop.org/wiki/Software/systemd
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>

Package: libc6
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 23764
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: same
Source: glibc
Version: 2.21-0ubuntu4
Replaces: libc6-powerpc
Depends: libgcc1
Suggests: glibc-doc, debconf | debconf-2.0, locales
Breaks: hurd (<< 1:0.5.git20140203-1), libtirpc1 (<< 0.2.3), nscd (<< 2.21)
Conflicts: prelink (<= 0.0.20090311-1), tzdata (<< 2007k-1), tzdata-etch
Conffiles:
 /etc/ld.so.conf.d/powerpc-linux-gnu.conf 4b25e6a2e3cc3eb0b669b74e1237c5f5
Description: GNU C Library: Shared libraries
 Contains the standard libraries that are used by nearly all programs on
 the system. This package includes shared versions of the standard C library
 and the standard math library, as well as many others.
Homepage: http://www.gnu.org/software/libc/libc.html
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>

Package: libprocps3
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 197
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: same
Source: procps
Version: 1:3.3.9-1ubuntu8
Replaces: procps (<< 1:3.3.2-1)
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: library for accessing process information from /proc
 The libprocps library is a way of accessing information out of the /proc
 filesystem.
 .
 This package contains the shared libraries necessary to run programs
 compilied with libprocps.
Homepage: http://gitorious.org/procps
Original-Maintainer: Craig Small <csmall@debian.org>

Package: libpcre3
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 636
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: same
Source: pcre3
Version: 2:8.35-3.3ubuntu1
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Breaks: approx (<< 4.4-1~), cduce (<< 0.5.3-2~), cmigrep (<< 1.5-7~), galax (<< 1.1-7~), libpcre-ocaml (<< 6.0.1~), liquidsoap (<< 0.9.2-3~), ocsigen (<< 1.3.3-1~)
Conflicts: libpcre3-dev (<= 4.3-3)
Description: Perl 5 Compatible Regular Expression Library - runtime files
 This is a library of functions to support regular expressions whose syntax
 and semantics are as close as possible to those of the Perl 5 language.
 .
 This package contains the runtime libraries.
Original-Maintainer: Mark Baker <mark@mnb.org.uk>

Package: libdevmapper1.02.1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 387
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: same
Source: lvm2 (2.02.111-2ubuntu1)
Version: 2:1.02.90-2ubuntu1
Depends: libc6 (>= 2.4), libselinux1 (>= 1.32), libudev1 (>= 183), dmsetup (>= 2:1.02.90-2ubuntu1)
Pre-Depends: multiarch-support
Breaks: lvm2 (<< 2.02.66)
Conflicts: libdevmapper1.02
Description: Linux Kernel Device Mapper userspace library
 The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
 Team's implementation of a minimalistic kernel-space driver that handles
 volume management, while keeping knowledge of the underlying device layout
 in user-space.  This makes it useful for not only LVM, but EVMS, software
 raid, and other drivers that create "virtual" block devices.
 .
 This package contains the (user-space) shared library for accessing the
 device-mapper; it allows usage of the device-mapper through a clean,
 consistent interface (as opposed to through kernel ioctls).
Homepage: http://sources.redhat.com/lvm2/
Original-Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>

Package: coreutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 6436
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: foreign
Version: 8.23-3ubuntu1
Replaces: mktemp, realpath, timeout
Pre-Depends: libacl1 (>= 2.2.51-8), libattr1 (>= 1:2.4.46-8), libc6 (>= 2.17), libselinux1 (>= 2.1.13)
Conflicts: timeout
Description: GNU core utilities
 This package contains the basic file, shell and text manipulation
 utilities which are expected to exist on every operating system.
 .
 Specifically, this package includes:
 arch base64 basename cat chcon chgrp chmod chown chroot cksum comm cp
 csplit cut date dd df dir dircolors dirname du echo env expand expr
 factor false flock fmt fold groups head hostid id install join link ln
 logname ls md5sum mkdir mkfifo mknod mktemp mv nice nl nohup nproc numfmt
 od paste pathchk pinky pr printenv printf ptx pwd readlink realpath rm
 rmdir runcon sha*sum seq shred sleep sort split stat stty sum sync tac
 tail tee test timeout touch tr true truncate tsort tty uname unexpand
 uniq unlink users vdir wc who whoami yes
Homepage: http://gnu.org/software/coreutils
Original-Maintainer: Michael Stone <mstone@debian.org>

Package: e2fsprogs
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 3665
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: foreign
Version: 1.42.12-1ubuntu2
Replaces: hurd (<= 20040301-1), libblkid1 (<< 1.38+1.39-WIP-2005.12.10-2), libuuid1 (<< 1.38+1.39-WIP-2005.12.10-2)
Pre-Depends: e2fslibs (= 1.42.12-1ubuntu2), libblkid1 (>= 2.17.2), libc6 (>= 2.11), libcomerr2 (>= 1.42~WIP-2011-10-05-1), libss2 (>= 1.34-1), libuuid1 (>= 2.16), util-linux (>= 2.15~rc1-1)
Suggests: gpart, parted, e2fsck-static
Conflicts: dump (<< 0.4b4-4), initscripts (<< 2.85-4), quota (<< 1.55-8.1), sysvinit (<< 2.85-4)
Conffiles:
 /etc/mke2fs.conf e2cdbf0620e93949af5857eb4739f949
Description: ext2/ext3/ext4 file system utilities
 The ext2, ext3 and ext4 file systems are successors of the original ext
 ("extended") file system. They are the main file system types used for
 hard disks on Debian and other Linux systems.
 .
 This package contains programs for creating, checking, and maintaining
 ext2/3/4-based file systems.  It also includes the "badblocks" program,
 which can be used to scan for bad blocks on a disk or other storage device.
Homepage: http://e2fsprogs.sourceforge.net
Original-Maintainer: Theodore Y. Ts'o <tytso@mit.edu>

Package: tar
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 792
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: foreign
Version: 1.27.1-2
Replaces: cpio (<< 2.4.2-39)
Pre-Depends: libacl1 (>= 2.2.51-8), libc6 (>= 2.17), libselinux1 (>= 1.32)
Suggests: bzip2, ncompress, xz-utils, tar-scripts
Breaks: dpkg-dev (<< 1.14.26)
Conflicts: cpio (<= 2.4.2-38)
Conffiles:
 /etc/rmt 3c58b7cd13da1085eff0acc6a00f43c7
Description: GNU version of the tar archiving utility
 Tar is a program for packaging a set of files as a single archive in tar
 format.  The function it performs is conceptually similar to cpio, and to
 things like PKZIP in the DOS world.  It is heavily used by the Debian package
 management system, and is useful for performing system backups and exchanging
 sets of files with others.
Original-Maintainer: Bdale Garbee <bdale@gag.com>

Package: libbz2-1.0
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 116
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: same
Source: bzip2
Version: 1.0.6-7
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: high-quality block-sorting file compressor library - runtime
 This package contains libbzip2 which is used by the bzip2 compressor.
 .
 bzip2 is a freely available, patent free, high-quality data compressor.
 It typically compresses files to within 10% to 15% of the best available
 techniques, whilst being around twice as fast at compression and six
 times faster at decompression.
 .
 bzip2 compresses files using the Burrows-Wheeler block-sorting text
 compression algorithm, and Huffman coding. Compression is generally
 considerably better than that achieved by more conventional
 LZ77/LZ78-based compressors, and approaches the performance of the PPM
 family of statistical compressors.
 .
 The archive file format of bzip2 (.bz2) is incompatible with that of its
 predecessor, bzip (.bz).
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Homepage: http://www.bzip.org/

Package: libkmod2
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 175
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: same
Source: kmod
Version: 18-3ubuntu1
Depends: libc6 (>= 2.17)
Pre-Depends: multiarch-support
Description: libkmod shared library
 This library provides an API for insertion, removal, configuration and
 listing of kernel modules.
Original-Maintainer: Marco d'Itri <md@linux.it>

Package: libblkid1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 433
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: same
Source: util-linux
Version: 2.25.2-4ubuntu2
Depends: libc6 (>= 2.17), libuuid1 (>= 2.16)
Pre-Depends: multiarch-support
Description: block device id library
 The blkid library which allows system programs like fsck and
 mount to quickly and easily find block devices by filesystem UUID and
 LABEL.  This allows system administrators to avoid specifying
 filesystems by hard-coded device names, but via a logical naming
 system instead.
Original-Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>

Package: lsb-base
Status: install ok installed
Priority: required
Section: misc
Installed-Size: 83
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: lsb
Version: 4.1+Debian11ubuntu8
Replaces: upstart (<< 1.12.1-0ubuntu8)
Breaks: upstart (<< 1.12.1-0ubuntu8)
Description: Linux Standard Base 4.1 init script functionality
 The Linux Standard Base (http://www.linuxbase.org/) is a standard
 core system that third-party applications written for Linux can
 depend upon.
 .
 This package only includes the init-functions shell library, which
 may be used by other packages' initialization scripts for console
 logging and other purposes.
Homepage: http://www.linuxfoundation.org/collaborate/workgroups/lsb
Original-Maintainer: Debian LSB Team <debian-lsb@lists.debian.org>

Package: procps
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 1347
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: foreign
Version: 1:3.3.9-1ubuntu8
Provides: watch
Depends: libc6 (>= 2.15), libncurses5 (>= 5.5-5~), libncursesw5 (>= 5.6+20070908), libprocps3, libtinfo5, lsb-base (>= 4.1+Debian11ubuntu7), initscripts
Recommends: psmisc
Breaks: guymager (<= 0.5.9-1), open-vm-tools (<= 2011.12.20-562307-1), xmem (<= 1.20-27.1)
Conflicts: pgrep (<< 3.3-5), w-bassman (<< 1.0-3)
Conffiles:
 /etc/init.d/procps 021482ebab1024f5ed76e650e5191e8f
 /etc/init/procps-instance.conf 96170a339d08797dc90d69b01d6bf610
 /etc/init/procps.conf c273de3ebde8d4a50f17de17bb04a3e5
 /etc/sysctl.conf 76c1d8285c578d5e827c3e07b9738112
 /etc/sysctl.d/10-arch-specific.conf 4eb8cf3f5cfed3129215dfc96683cd54
 /etc/sysctl.d/10-console-messages.conf 154f6f5c5810d10bb303fb6a8e907c6a
 /etc/sysctl.d/10-ipv6-privacy.conf e9473d12b4a7069d6a3ca8b694511ddf
 /etc/sysctl.d/10-kernel-hardening.conf 5c1388f00011a287cdeba60208c674e1
 /etc/sysctl.d/10-link-restrictions.conf 8568316f2baa8db06554dab91f93a161
 /etc/sysctl.d/10-magic-sysrq.conf b3059f2835f17c97265433fdfdee358f
 /etc/sysctl.d/10-network-security.conf 4ac7258f5336e7eeaf448c05ab668d3c
 /etc/sysctl.d/10-ptrace.conf 47f40494b2fc698e15549e0a4a79e81c
 /etc/sysctl.d/10-zeropage.conf 8d7193abcc4dfedaf519dd03016a5e59
 /etc/sysctl.d/README c20074b9b11a5202758c69d7bcb6996f
Description: /proc file system utilities
 This package provides command line and full screen utilities for browsing
 procfs, a "pseudo" file system dynamically generated by the kernel to
 provide information about the status of entries in its process table
 (such as whether the process is running, stopped, or a "zombie").
 .
 It contains free, kill, pkill, pgrep, pmap, ps, pwdx, skill, slabtop,
 snice, sysctl, tload, top, uptime, vmstat, w, and watch.
Homepage: http://gitorious.org/procps
Original-Maintainer: Craig Small <csmall@debian.org>

Package: libgpg-error0
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 160
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: same
Source: libgpg-error
Version: 1.17-3ubuntu1
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: library for common error values and messages in GnuPG components
 Library that defines common error values for all GnuPG
 components.  Among these are GPG, GPGSM, GPGME, GPG-Agent, libgcrypt,
 pinentry, SmartCard Daemon and possibly more in the future.
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Homepage: http://www.gnupg.org/related_software/libgpg-error/

Package: base-files
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 432
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: foreign
Version: 7.2ubuntu9
Replaces: base, dpkg (<= 1.15.0), miscutils
Provides: base
Pre-Depends: awk
Breaks: initscripts (<< 2.88dsf-13.3), sendfile (<< 2.1b.20080616-5.2~)
Conffiles:
 /etc/debian_version 142012ca081ab0981cdcc1ac6db77c34
 /etc/dpkg/origins/debian 731423fa8ba067262f8ef37882d1e742
 /etc/dpkg/origins/ubuntu ea35901c45553c3451f60476be94d2d8
 /etc/host.conf 89408008f2585c957c031716600d5a80
 /etc/issue e577b783f81f431a647c72f72f9d167f
 /etc/issue.net 9de1f5e17b64836c365a2075a4b4e8c9
 /etc/legal 0110925f6e068836ef2e09356e3651d9
 /etc/lsb-release 1c0dbcefb192d47131060d13ae463835
 /etc/os-release 6d2b239f9e2b9b9a7363ed9ee940ca70
 /etc/update-motd.d/00-header 4a1e6eed7a59f200b4267085721750a3
 /etc/update-motd.d/10-help-text 5064fb57493325202dded183ab0c4ebd
Description: Debian base system miscellaneous files
 This package contains the basic filesystem hierarchy of a Debian system, and
 several important miscellaneous files, such as /etc/debian_version,
 /etc/host.conf, /etc/issue, /etc/motd, /etc/profile, and others,
 and the text of several common licenses in use on Debian systems.
Original-Maintainer: Santiago Vila <sanvila@debian.org>

Package: sensible-utils
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 110
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 0.0.9
Replaces: debianutils (<= 2.32.3), manpages-pl (<= 20060617-3~)
Description: Utilities for sensible alternative selection
 This package provides a number of small utilities which are used
 by programs to sensibly select and spawn an appropriate browser,
 editor, or pager.
 .
 The specific utilities included are: sensible-browser sensible-editor
 sensible-pager
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>

Package: passwd
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 2792
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: foreign
Source: shadow
Version: 1:4.1.5.1-1.1ubuntu4
Replaces: manpages-tr (<< 1.0.5), manpages-zh (<< 1.5.1-1)
Depends: libc6 (>= 2.8), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), libsemanage1 (>= 2.0.3), libpam-modules, debianutils (>= 2.15.2)
Conffiles:
 /etc/cron.daily/passwd db990990933b6f56322725223f13c2bc
 /etc/default/useradd cc9f9a7713ab62a32cd38363d958f396
 /etc/init/passwd.conf ea81baf06e4c358225ce22b786ad9e6a
 /etc/pam.d/chfn 4d466e00a348ba426130664d795e8afa
 /etc/pam.d/chpasswd 9900720564cb4ee98b7da29e2d183cb2
 /etc/pam.d/chsh a6e9b589e90009334ffd030d819290a6
 /etc/pam.d/newusers 1454e29bfa9f2a10836563e76936cea5
 /etc/pam.d/passwd eaf2ad85b5ccd06cceb19a3e75f40c63
Description: change and administer password and group data
 This package includes passwd, chsh, chfn, and many other programs to
 maintain password and group data.
 .
 Shadow passwords are supported.  See /usr/share/doc/passwd/README.Debian
Homepage: http://pkg-shadow.alioth.debian.org/
Original-Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>

Package: ncurses-base
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 371
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: ncurses
Version: 5.9+20140712-2ubuntu2
Provides: ncurses-runtime
Breaks: ncurses-term (<< 5.7+20100313-3)
Conflicts: ncurses, ncurses-runtime
Conffiles:
 /etc/terminfo/README 45b6df19fb5e21f55717482fa7a30171
Description: basic terminal type definitions
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains terminfo data files to support the most common types of
 terminal, including ansi, dumb, linux, rxvt, screen, sun, vt100, vt102, vt220,
 vt52, and xterm.
Homepage: http://invisible-island.net/ncurses/
Original-Maintainer: Craig Small <csmall@debian.org>

Package: libc-bin
Essential: yes
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 3579
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: foreign
Source: glibc
Version: 2.21-0ubuntu4
Replaces: libc0.1, libc0.3, libc6, libc6.1
Depends: libc6 (>> 2.21), libc6 (<< 2.22), libcap2 (>= 1:2.10)
Breaks: libc0.1 (<< 2.10), libc0.3 (<< 2.10), libc6 (<< 2.10), libc6.1 (<< 2.10)
Conffiles:
 /etc/bindresvport.blacklist 4c09213317e4e3dd3c71d74404e503c5
 /etc/default/nss d6d5d6f621fb3ead2548076ce81e309c
 /etc/gai.conf 28fa76ff5a9e0566eaa1e11f1ce51f09
 /etc/ld.so.conf 4317c6de8564b68d628c21efa96b37e4
 /etc/ld.so.conf.d/libc.conf d4d833fd095fb7b90e1bb4a547f16de6
Description: GNU C Library: Binaries
 This package contains utility programs related to the GNU C Library.
 .
  * catchsegv: catch segmentation faults in programs
  * getconf: query system configuration variables
  * getent: get entries from administrative databases
  * iconv, iconvconfig: convert between character encodings
  * ldd, ldconfig: print/configure shared library dependencies
  * locale, localedef: show/generate locale definitions
  * tzselect, zdump, zic: select/dump/compile time zones
Homepage: http://www.gnu.org/software/libc/libc.html
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>

Package: libsemanage1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 269
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: same
Source: libsemanage
Version: 2.3-1build1
Depends: libsemanage-common (= 2.3-1build1), libaudit1 (>= 1:2.2.1), libbz2-1.0, libc6 (>= 2.8), libselinux1 (>= 2.1.12), libsepol1 (>= 2.1.4), libustr-1.0-1 (>= 1.0.4)
Pre-Depends: multiarch-support
Description: SELinux policy management library
 This package provides the shared libraries for SELinux policy management.
 It uses libsepol for binary policy manipulation and libselinux for
 interacting with the SELinux system.  It also exec's helper programs
 for loading policy and for checking whether the file_contexts
 configuration is valid (load_policy and setfiles from
 policycoreutils) presently, although this may change at least for the
 bootstrapping case
 .
 Security-enhanced Linux is a patch of the Linux kernel and a
 number of utilities with enhanced security functionality designed to
 add mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement, Role-based Access
 Control, and Multi-level Security.
Original-Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Homepage: http://userspace.selinuxproject.org/

Package: udev
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 6809
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: foreign
Source: systemd
Version: 219-7ubuntu3
Replaces: bash-completion (<< 1:2.1)
Depends: libacl1 (>= 2.2.51-8), libblkid1 (>= 2.19.1), libc6 (>= 2.17), libkmod2 (>= 5~), libselinux1 (>= 2.0.65), lsb-base (>= 4.1+Debian11ubuntu7), adduser, libudev1 (= 219-7ubuntu3), util-linux (>= 2.25), procps
Pre-Depends: debconf (>= 1.4.69) | debconf-2.0
Breaks: bash-completion (<< 1:2.1), consolekit (<< 0.4.6-1), kmod (<< 14), plymouth (<< 0.9.0-0ubuntu8~), systemd (<< 215-1)
Conffiles:
 /etc/init.d/lvm2 16fcd935b49ff821069136d4e9954e08
 /etc/init.d/udev 271c550974ee1e323e2ac4d87d36b034
 /etc/init.d/udev-finish fd3ce194c134bcd790681ea487b19126
 /etc/init/udev-fallback-graphics.conf 8de8db40eddbd151e1ca373ae79fb57a
 /etc/init/udev-finish.conf 089140a32d519840674be9a274da1a42
 /etc/init/udev.conf 41c0081f3a830e0902aaff76a53edf98
 /etc/init/udevmonitor.conf b541dfb5aa4958e9a5336ecaec00ca15
 /etc/init/udevtrigger.conf 651ff2421dde80be7ce7ccbf7fa8cf18
 /etc/modprobe.d/fbdev-blacklist.conf 0b9c466830040ec52986cc3ea117bef5
 /etc/udev/udev.conf a9c43ddab6e58eefa56db50ff44b2b46
Description: /dev/ and hotplug management daemon
 udev is a daemon which dynamically creates and removes device nodes from
 /dev/, handles hotplug events and loads drivers at boot time.
Homepage: http://www.freedesktop.org/wiki/Software/systemd
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>

Package: libapparmor1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 141
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: same
Source: apparmor
Version: 2.9.1-0ubuntu9
Depends: libc6 (>= 2.8)
Description: changehat AppArmor library
 This package provides the shared library used for making use of the
 AppArmor profile and changehat functionality, as well as common log
 parsing routines.
Homepage: http://apparmor.net/
Original-Maintainer: Kees Cook <kees@debian.org>

Package: sysvinit-utils
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 480
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: foreign
Source: sysvinit
Version: 2.88dsf-53.2ubuntu12
Replaces: last, sysvinit (<= 2.86.ds1-65)
Depends: libc6 (>= 2.7), libselinux1 (>= 1.32)
Suggests: bootlogd, sash
Breaks: systemd (<< 215), upstart (<< 1.5-0ubuntu5)
Conflicts: chkconfig (<< 11.0-79.1-2), last, startpar (<< 0.58-2), sysvconfig
Description: System-V-like utilities
 This package contains the important System-V-like utilities.
 .
 Specifically, this package includes:
 killall5, last, lastb, mesg, pidof, service, sulogin
Homepage: http://savannah.nongnu.org/projects/sysvinit
Original-Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>

Package: libsemanage-common
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 57
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: libsemanage
Version: 2.3-1build1
Replaces: libsemanage1 (<= 2.0.41-1), libsemanage1-dev (<< 2.1.6-3~)
Breaks: libsemanage1 (<= 2.0.41-1), libsemanage1-dev (<< 2.1.6-3~)
Conffiles:
 /etc/selinux/semanage.conf e69d42a4d98a93c3b8e201bdda367c55
Description: Common files for SELinux policy management libraries
 This package provides the common files used by the shared libraries
 for SELinux policy management.
 .
 Security-enhanced Linux is a patch of the Linux kernel and a
 number of utilities with enhanced security functionality designed to
 add mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement, Role-based Access
 Control, and Multi-level Security.
Original-Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Homepage: http://userspace.selinuxproject.org/

Package: libdebconfclient0
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 85
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: same
Source: cdebconf
Version: 0.192ubuntu1
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: Debian Configuration Management System (C-implementation library)
 Debconf is a configuration management system for Debian packages. It is
 used by some packages to prompt you for information before they are
 installed. This is a reimplementation of the original debconf version
 in C.
 .
 This is the libraries needed by libdebconfclient-dev and cdebconf.
Original-Maintainer: Debian Install System Team <debian-boot@lists.debian.org>

Package: libselinux1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 210
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: same
Source: libselinux
Version: 2.3-2
Depends: libc6 (>= 2.8), libpcre3
Pre-Depends: multiarch-support
Description: SELinux runtime shared libraries
 This package provides the shared libraries for Security-enhanced
 Linux that provides interfaces (e.g. library functions for the
 SELinux kernel APIs like getcon(), other support functions like
 getseuserbyname()) to SELinux-aware applications. Security-enhanced
 Linux is a patch of the Linux kernel and a number of utilities with
 enhanced security functionality designed to add mandatory access
 controls to Linux.  The Security-enhanced Linux kernel contains new
 architectural components originally developed to improve the security
 of the Flask operating system. These architectural components provide
 general support for the enforcement of many kinds of mandatory access
 control policies, including those based on the concepts of Type
 Enforcement, Role-based Access Control, and Multi-level Security.
 .
 libselinux1 provides an API for SELinux applications to get and set
 process and file security contexts and to obtain security policy
 decisions.  Required for any applications that use the SELinux
 API. libselinux may use the shared libsepol to manipulate the binary
 policy if necessary (e.g. to downgrade the policy format to an older
 version supported by the kernel) when loading policy.
Original-Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Homepage: http://userspace.selinuxproject.org/

Package: systemd
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 18708
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: foreign
Version: 219-7ubuntu3
Replaces: systemd-services
Provides: systemd-services
Depends: libacl1 (>= 2.2.51-8), libapparmor1 (>= 2.8.98-0ubuntu4), libaudit1 (>= 1:2.2.1), libblkid1 (>= 2.19.1), libcap2 (>= 1:2.10), libcryptsetup4 (>= 2:1.4.3), libkmod2 (>= 5~), libmount1 (>= 2.20.1), libpam0g (>= 0.99.7.1), libselinux1 (>= 2.1.9), libsystemd0 (= 219-7ubuntu3), util-linux (>= 2.25), mount (>= 2.25), initscripts (>= 2.88dsf-53.2), sysv-rc, udev, adduser, libcap2-bin
Pre-Depends: libc6 (>= 2.17), libgcrypt20 (>= 1.6.1), liblzma5 (>= 5.1.1alpha+20120614), libselinux1 (>= 1.32)
Recommends: libpam-systemd, dbus
Suggests: systemd-ui
Breaks: lsb-base (<< 4.1+Debian4), lvm2 (<< 2.02.104-1), systemd-shim (<< 8-2)
Conflicts: klogd, systemd-services
Conffiles:
 /etc/dbus-1/system.d/org.freedesktop.hostname1.conf f55c94d000b5d62b5f06d38852977dd1
 /etc/dbus-1/system.d/org.freedesktop.locale1.conf 5893ab03e7e96aa3759baceb4dd04190
 /etc/dbus-1/system.d/org.freedesktop.login1.conf 96bf488f3da8f0ca813cc78e71eeb605
 /etc/dbus-1/system.d/org.freedesktop.machine1.conf 206b67b8db666b714ba37c8257e10dad
 /etc/dbus-1/system.d/org.freedesktop.network1.conf 162e9a90d8f824f79ef2c6390827ec7b
 /etc/dbus-1/system.d/org.freedesktop.resolve1.conf 6969148b4616c56a5c9065cec5ab0775
 /etc/dbus-1/system.d/org.freedesktop.systemd1.conf 846824928e39a465c06c3aae53510535
 /etc/dbus-1/system.d/org.freedesktop.timedate1.conf 682369fbf3de26b21e775732c89a2bbe
 /etc/pam.d/systemd-user 0f3e67e1d7402cf3aa0ffde915168c94
 /etc/systemd/bootchart.conf 7cb6c9cab8ec511882e0e05fceb87e45
 /etc/systemd/journald.conf fb84d34126b84b864b9f708951a93ac1
 /etc/systemd/logind.conf 14ab8c27dd3c0c71cf92307f0171c15e
 /etc/systemd/resolved.conf a14d4e79c6d03ddd4d4f9bad8d7ab0a4
 /etc/systemd/system.conf 5434e3eefac186ad9724d882073b9c96
 /etc/systemd/timesyncd.conf 54914cf38ff3b8f7dc81b87bb3849520
 /etc/systemd/user.conf 2eaf5976751be8864d0555f30814d832
Description: system and service manager
 systemd is a system and service manager for Linux. It provides aggressive
 parallelization capabilities, uses socket and D-Bus activation for starting
 services, offers on-demand starting of daemons, keeps track of processes
 using Linux control groups, supports snapshotting and restoring of the system
 state, maintains mount and automount points and implements an elaborate
 transactional dependency-based service control logic.
 .
 systemd is compatible with SysV and LSB init scripts and can work as a
 drop-in replacement for sysvinit.
 .
 Installing the systemd package will not switch your init system unless you
 boot with init=/bin/systemd or install systemd-sysv in addition.
Homepage: http://www.freedesktop.org/wiki/Software/systemd
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>

Package: dpkg
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 7317
Origin: debian
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Bugs: debbugs://bugs.debian.org
Architecture: powerpc
Multi-Arch: foreign
Version: 1.17.25ubuntu1
Replaces: manpages-it (<< 2.80-4)
Pre-Depends: libbz2-1.0, libc6 (>= 2.11), liblzma5 (>= 5.1.1alpha+20120614), libselinux1 (>= 2.3), zlib1g (>= 1:1.1.4), tar (>= 1.23)
Suggests: apt
Breaks: apt (<< 0.7.7~), apt-cudf (<< 3.3~beta1-3~), aptitude (<< 0.4.7-1~), auctex (<< 11.87-3+deb8u1~), ccache (<< 3.1.10-1~), cups (<< 1.7.5-10~), debian-security-support (<< 2014.10.26~), distcc (<< 3.1-6.1~), doc-base (<< 0.10.5~), dpkg-dev (<< 1.15.8), fontconfig (<< 2.11.1-0ubuntu5~), fusionforge-plugin-mediawiki (<< 5.3.2+20141104-3~), gap-core (<< 4r7p5-2~), gitweb (<< 1:2.1.4-2.1~), grace (<< 1:5.1.24-3~), gxine (<< 0.5.908-3.1~), hoogle (<< 4.2.33-4~), icecc (<< 1.0.1-2~), install-info (<< 5.1.dfsg.1-3~), libapache2-mod-php5 (<< 5.6.4+dfsg-3~), libapache2-mod-php5filter (<< 5.6.4+dfsg-3~), libdpkg-perl (<< 1.15.8), libjs-protoaculous (<< 5~), man-db (<< 2.6.3-6~), mcollective (<< 2.6.0+dfsg-2.1~), php5-fpm (<< 5.6.4+dfsg-3~), pypy (<< 2.4.0+dfsg-3~), readahead-fedora (<< 2:1.5.6-5.2~), ureadahead (<< 0.100.0-17~), wordpress (<< 4.1+dfsg-1~), xfonts-traditional (<< 1.7~), xine-ui (<< 0.99.9-1.2~)
Conflicts: ada-reference-manual (<< 20021112web-4~), asn1-mode (<< 2.7-7~), bogosort (<< 0.4.2-3~), cl-yacc (<< 0.3-3~), cpp-4.1-doc (<< 4.1.2.nf2-4~), cpp-4.2-doc (<< 4.2.4.nf1-4~), gcc-4.1-doc (<< 4.1.2.nf2-4~), gcc-4.2-doc (<< 4.2.4.nf1-4~), gcj-4.1-doc (<< 4.1.2.nf2-4~), gcj-4.2-doc (<< 4.2.4.nf1-4~), gfortran-4.1-doc (<< 4.1.2.nf2-4~), gfortran-4.2-doc (<< 4.2.4.nf1-4~), ggz-docs (<< 0.0.14.1-2~), glame (<< 2.0.1-6~), gnat-4.1-doc (<< 4.1.2.nf2-4~), gnat-4.2-doc (<< 4.2.4.nf1-4~), gtalk (<< 0.99.10-16~), libalogg-dev (<< 1.3.7-2~), libgtk1.2-doc (<< 1.2.10-19~), libnettle-dev (<< 2~), liborbit-dev (<< 0.5.17-12~), libreadline5-dev (<< 5.2-8~), librep-doc (<< 0.90~), mmucl (<< 1.5.2-3~), nxml-mode (<< 20041004-9~), octave3.0-info (<< 1:3.0.5-7+rm), octave3.2-info (<< 3.2.4-12+rm), polgen-doc (<< 1.3-3+rm), r6rs-doc (<< 1.0-2~), serveez-doc (<< 0.1.5-3~), slat (<< 2.0-6~), texlive-base-bin-doc (<< 2007.dfsg.2-9~), ttcn-el (<< 0.6.9-2~), ulog-acctd (<< 0.4.3-3~), xconq-doc (<< 7.4.1-5~), zenirc (<< 2.112.dfsg-1~)
Conffiles:
 /etc/alternatives/README 69c4ba7f08363e998e0f2e244a04f881
 /etc/cron.daily/dpkg b8065b6bfc248caba501c3f5bb508e66
 /etc/dpkg/dpkg.cfg f4413ffb515f8f753624ae3bb365b81b
 /etc/logrotate.d/dpkg 782ea5ae536f67ff51dc8c3e2eeb4cf9
Description: Debian package management system
 This package provides the low-level infrastructure for handling the
 installation and removal of Debian software packages.
 .
 For Debian package development tools, install dpkg-dev.
Homepage: https://wiki.debian.org/Teams/Dpkg
Original-Maintainer: Dpkg Developers <debian-dpkg@lists.debian.org>

Package: sysv-rc
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 230
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: sysvinit
Version: 2.88dsf-53.2ubuntu12
Replaces: file-rc
Depends: debconf (>= 0.5) | debconf-2.0, sysvinit-utils (>= 2.86.ds1-62), insserv (>> 1.12.0-10)
Recommends: lsb-base (>= 3.2-14)
Suggests: sysv-rc-conf, bum
Breaks: initscripts (<< 2.86.ds1-63), systemd (<< 215)
Conflicts: file-rc
Description: System-V-like runlevel change mechanism
 This package provides support for the System-V like system
 for booting, changing runlevels, and shutting down,
 configured through symbolic links in /etc/rc?.d/.
Homepage: http://savannah.nongnu.org/projects/sysvinit
Original-Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>

Package: apt
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 4447
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Version: 1.0.9.7ubuntu4
Replaces: manpages-it (<< 2.80-4~), manpages-pl (<< 20060617-3~), openjdk-6-jdk (<< 6b24-1.11-0ubuntu1~), sun-java5-jdk (>> 0), sun-java6-jdk (>> 0)
Depends: libapt-pkg4.12 (>= 1.0.9.7ubuntu4), libc6 (>= 2.15), libgcc1 (>= 1:4.2.1), libstdc++6 (>= 4.9), ubuntu-keyring, gnupg
Suggests: aptitude | synaptic | wajig, dpkg-dev (>= 1.17.2), apt-doc, python-apt
Breaks: manpages-it (<< 2.80-4~), manpages-pl (<< 20060617-3~), openjdk-6-jdk (<< 6b24-1.11-0ubuntu1~), sun-java5-jdk (>> 0), sun-java6-jdk (>> 0)
Conflicts: python-apt (<< 0.7.93.2~)
Conffiles:
 /etc/apt/apt.conf.d/01-vendor-ubuntu 8baafd95750e9c31c45512ff7bde7043
 /etc/apt/apt.conf.d/01autoremove 5bf3e7bfa3bec23d634c9f3652da1787
 /etc/apt/apt.conf.d/20changelog 8baafd95750e9c31c45512ff7bde7043
 /etc/cron.daily/apt 38f629d906ca7e292db6e426cc403f98
 /etc/kernel/postinst.d/apt-auto-removal 5d7236fb0c051eec2f5156b641fc447b
 /etc/logrotate.d/apt 179f2ed4f85cbaca12fa3d69c2a4a1c3
Description: commandline package manager
 This package provides commandline tools for searching and
 managing as well as querying information about packages
 as a low-level access to all features of the libapt-pkg library.
 .
 These include:
  * apt-get for retrieval of packages and information about them
    from authenticated sources and for installation, upgrade and
    removal of packages together with their dependencies
  * apt-cache for querying available information about installed
    as well as installable packages
  * apt-cdrom to use removable media as a source for packages
  * apt-config as an interface to the configuration settings
  * apt-key as an interface to manage authentication keys
Original-Maintainer: APT Development Team <deity@lists.debian.org>

Package: dmsetup
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 185
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: foreign
Source: lvm2 (2.02.111-2ubuntu1)
Version: 2:1.02.90-2ubuntu1
Depends: libc6 (>= 2.4), libdevmapper1.02.1 (>= 2:1.02.90), util-linux (>> 2.16)
Conflicts: devicekit-disks (<< 009)
Description: Linux Kernel Device Mapper userspace library
 The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
 Team's implementation of a minimalistic kernel-space driver that handles
 volume management, while keeping knowledge of the underlying device layout
 in user-space.  This makes it useful for not only LVM, but EVMS, software
 raid, and other drivers that create "virtual" block devices.
 .
 This package contains a utility for modifying device mappings.
Homepage: http://sources.redhat.com/lvm2/
Original-Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>

Package: diffutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 404
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Version: 1:3.3-1
Replaces: diff
Pre-Depends: libc6 (>= 2.17)
Suggests: diffutils-doc, wdiff
Description: File comparison utilities
 The diffutils package provides the diff, diff3, sdiff, and cmp programs.
 .
 `diff' shows differences between two files, or each corresponding file
 in two directories.  `cmp' shows the offsets and line numbers where
 two files differ.  `cmp' can also show all the characters that
 differ between the two files, side by side.  `diff3' shows differences
 among three files.  `sdiff' merges two files interactively.
 .
 The set of differences produced by `diff' can be used to distribute
 updates to text files (such as program source code) to other people.
 This method is especially useful when the differences are small compared
 to the complete files.  Given `diff' output, the `patch' program can
 update, or "patch", a copy of the file.
Original-Maintainer: Santiago Vila <sanvila@debian.org>
Homepage: http://www.gnu.org/software/diffutils/

Package: libpam-modules
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 3136
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: same
Source: pam
Version: 1.1.8-3.1ubuntu3
Replaces: libpam-umask, libpam0g-util
Provides: libpam-mkhomedir, libpam-motd, libpam-umask
Pre-Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.15), libdb5.3, libpam0g (>= 1.1.3-2), libselinux1 (>= 2.1.9), debconf (>= 0.5) | debconf-2.0, libpam-modules-bin (= 1.1.8-3.1ubuntu3)
Recommends: update-motd
Conflicts: libpam-mkhomedir, libpam-motd, libpam-umask
Conffiles:
 /etc/security/access.conf 13ec4d189f0ed9acf3433977a53d446b
 /etc/security/group.conf f1e26e8db6f7abd2d697d7dad3422c36
 /etc/security/limits.conf 11c27ba00b7bd6a255f33126f75c5005
 /etc/security/namespace.conf 6424c99a62ddf4b7d3ca713bb06ded89
 /etc/security/namespace.init b46b23d64860d1557d2a8f44b231fd54
 /etc/security/pam_env.conf ddee4a931170dc21b4e0b9bb28e02a7b
 /etc/security/sepermit.conf d41c74654734a5c069a37bfc02f0a6d4
 /etc/security/time.conf 06e05c6079e839c8833ac7c3abfde192
Description: Pluggable Authentication Modules for PAM
 This package completes the set of modules for PAM. It includes the
  pam_unix.so module as well as some specialty modules.
Homepage: http://pam.sourceforge.net/
Original-Maintainer: Steve Langasek <vorlon@debian.org>

Package: insserv
Status: install ok installed
Priority: required
Section: misc
Installed-Size: 194
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Version: 1.14.0-5ubuntu3
Depends: libc6 (>= 2.7)
Suggests: bootchart2
Breaks: sysv-rc (<< 2.87dsf-3)
Conffiles:
 /etc/bash_completion.d/insserv 32975fe14795d6fce1408d5fd22747fd
 /etc/insserv.conf 3e9467113029a6356f57842085f3c849
Description: boot sequence organizer using LSB init.d script dependency information
 The insserv program is used by the standard SysV-based init system. It
 updates the order of symlinks in /etc/rc?.d/ based on dependencies
 specified by LSB headers in the init.d scripts themselves.
 .
 These declared relations between scripts make it possible to optimize
 the boot sequence for the currently installed set of packages, while
 detecting and rejecting dependency loops.
 .
 Using insserv incorrectly can result in an unbootable system.
Homepage: http://savannah.nongnu.org/projects/sysvinit
Original-Maintainer: Petter Reinholdtsen <pere@debian.org>

Package: libstdc++6
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 1589
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: same
Source: gcc-4.9
Version: 4.9.2-10ubuntu13
Replaces: libstdc++6-4.9-dbg (<< 4.9.0-3)
Depends: gcc-4.9-base (= 4.9.2-10ubuntu13), libc6 (>= 2.18), libgcc1 (>= 1:4.1.1)
Pre-Depends: multiarch-support
Breaks: gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2)
Conflicts: scim (<< 1.4.2-1)
Description: GNU Standard C++ Library v3
 This package contains an additional runtime library for C++ programs
 built with the GNU compiler.
 .
 libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which
 was included up to g++-2.95. The first version of libstdc++-v3 appeared
 in g++-3.0.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: gcc-4.9-base
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 221
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: same
Source: gcc-4.9
Version: 4.9.2-10ubuntu13
Breaks: dehydra (<= 0.9.hg20110609-2), gcc-4.4-base (<< 4.4.7), gcc-4.7-base (<< 4.7.3), gcj-4.4-base (<< 4.4.6-9~), gcj-4.6-base (<< 4.6.1-4~), gnat-4.4-base (<< 4.4.6-3~), gnat-4.6 (<< 4.6.1-5~)
Description: GCC, the GNU Compiler Collection (base package)
 This package contains files common to all languages and libraries
 contained in the GNU Compiler Collection (GCC).
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: libaudit-common
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 44
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: audit
Version: 1:2.3.7-1ubuntu2
Replaces: libaudit0, libaudit1 (<< 1:2.2.1-2)
Breaks: libaudit0, libaudit1 (<< 1:2.2.1-2)
Conffiles:
 /etc/libaudit.conf cdc703f9d27f0d980271a9e95d0f18b2
Description: Dynamic library for security auditing - common files
 The audit-libs package contains the dynamic libraries needed for
 applications to use the audit framework. It is used to monitor systems for
 security related events.
 .
 This package contains the libaudit.conf configuration file and the associated
 manpage.
Homepage: http://people.redhat.com/sgrubb/audit/
Original-Maintainer: Laurent Bigonville <bigon@debian.org>

Package: libcomerr2
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 156
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: same
Source: e2fsprogs
Version: 1.42.12-1ubuntu2
Replaces: e2fsprogs (<< 1.34-1)
Provides: libcomerr-kth-compat
Depends: libc6 (>= 2.17)
Pre-Depends: multiarch-support
Description: common error description library
 libcomerr is an attempt to present a common error-handling mechanism to
 manipulate the most common form of error code in a fashion that does not
 have the problems identified with mechanisms commonly in use.
Homepage: http://e2fsprogs.sourceforge.net
Original-Maintainer: Theodore Y. Ts'o <tytso@mit.edu>

Package: findutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 688
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: foreign
Version: 4.4.2-9build1
Pre-Depends: libc6 (>= 2.17)
Suggests: mlocate | locate
Description: utilities for finding files--find, xargs
 GNU findutils provides utilities to find files meeting specified
 criteria and perform various actions on the files which are found.
 This package contains 'find' and 'xargs'; however, 'locate' has
 been split off into a separate package.
Original-Maintainer: Andreas Metzler <ametzler@debian.org>
Homepage: http://savannah.gnu.org/projects/findutils/

Package: libpam0g
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 340
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: same
Source: pam
Version: 1.1.8-3.1ubuntu3
Replaces: libpam0g-util
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.8), debconf (>= 0.5) | debconf-2.0
Pre-Depends: multiarch-support
Suggests: libpam-doc
Description: Pluggable Authentication Modules library
 Contains the shared library for Linux-PAM, a library that enables the
 local system administrator to choose how applications authenticate users.
 In other words, without rewriting or recompiling a PAM-aware application,
 it is possible to switch between the authentication mechanism(s) it uses.
 One may entirely upgrade the local authentication system without touching
 the applications themselves.
Homepage: http://pam.sourceforge.net/
Original-Maintainer: Steve Langasek <vorlon@debian.org>

Package: libmount1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 503
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: same
Source: util-linux
Version: 2.25.2-4ubuntu2
Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.17), libselinux1 (>= 1.32)
Pre-Depends: multiarch-support
Description: device mounting library
 The device mounting library, used by mount and umount helpers.
Original-Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>

Package: login
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 1192
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Source: shadow
Version: 1:4.1.5.1-1.1ubuntu4
Replaces: manpages-de (<< 0.5-3), manpages-tr (<< 1.0.5), manpages-zh (<< 1.5.1-1)
Pre-Depends: libc6 (>= 2.7), libpam0g (>= 0.99.7.1), libpam-runtime, libpam-modules
Conflicts: amavisd-new (<< 2.3.3-8), backupninja (<< 0.9.3-5), echolot (<< 2.1.8-4), gnunet (<< 0.7.0c-2), python-4suite (<< 0.99cvs20060405-1)
Conffiles:
 /etc/login.defs be0977c1c1c84c62823c7d7d4e099067
 /etc/pam.d/login e7c11a24c72175f2451599d40e32f4ca
 /etc/pam.d/su 7309fb874571fe5447321b43448a50b3
 /etc/securetty d9e5bf5e6bfa00ddd273a3bcf1a49bec
Description: system login tools
 These tools are required to be able to login and use your system. The
 login program invokes your user shell and enables command execution. The
 newgrp program is used to change your effective group ID (useful for
 workgroup type situations). The su program allows changing your effective
 user ID (useful being able to execute commands as another user).
Homepage: http://pkg-shadow.alioth.debian.org/
Original-Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>

Package: adduser
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 644
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 3.113+nmu3ubuntu3
Replaces: manpages-it (<< 0.3.4-2), manpages-pl (<= 20051117-1)
Depends: perl-base (>= 5.6.0), passwd (>= 1:4.0.12), debconf | debconf-2.0
Suggests: liblocale-gettext-perl, perl-modules, ecryptfs-utils (>= 67-1)
Conffiles:
 /etc/deluser.conf 773fb95e98a27947de4a95abb3d3f2a2
Description: add and remove users and groups
 This package includes the 'adduser' and 'deluser' commands for creating
 and removing users.
 .
  - 'adduser' creates new users and groups and adds existing users to
    existing groups;
  - 'deluser' removes users and groups and removes users from a given
    group.
 .
 Adding users with 'adduser' is much easier than adding them manually.
 Adduser will choose appropriate UID and GID values, create a home
 directory, copy skeletal user configuration, and automate setting
 initial values for the user's password, real name and so on.
 .
 Deluser can back up and remove users' home directories
 and mail spool or all the files they own on the system.
 .
 A custom script can be executed after each of the commands.
 .
  Development mailing list:
    http://lists.alioth.debian.org/mailman/listinfo/adduser-devel/
Homepage: http://alioth.debian.org/projects/adduser/
Original-Maintainer: Debian Adduser Developers <adduser-devel@lists.alioth.debian.org>

Package: initscripts
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 300
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: foreign
Source: sysvinit
Version: 2.88dsf-53.2ubuntu12
Replaces: libc0.1, libc0.3, libc6, libc6.1
Depends: libc6 (>= 2.4), mount (>= 2.11x-1), debianutils (>= 4), lsb-base (>= 4.1+Debian11ubuntu7), sysvinit-utils (>= 2.88dsf-50), sysv-rc | file-rc, coreutils (>= 5.93)
Recommends: psmisc, e2fsprogs
Breaks: aide (<< 0.15.1-5), atm-tools (<< 1:2.5.1-1.3), autofs (<< 5.0.0), bootchart (<< 0.10~svn407-4), console-common (<< 0.7.86), console-setup (<< 1.70ubuntu9), cruft (<< 0.9.16), eepc-acpi-scripts (<< 1.1.12), fcheck (<< 2.7.59-16), hostapd (<< 1:0.7.3-3), hurd (<< 0.5.git20131101~), ifupdown (<< 0.7.46), libpam-mount (<< 2.13-1), live-build (<< 3.0~a26-1), ltsp-client-core (<< 5.2.16-1), mdadm (<< 3.2.2-1), nbd-client (<< 1:2.9.23-1), nfs-common (<< 1:1.2.5-3), portmap (<< 6.0.0-2), readahead-fedora (<< 2:1.5.6-3), resolvconf (<< 1.49), rpcbind (<< 0.2.0-7), rsyslog (<< 5.8.2-2), selinux-policy-default (<= 2:0.2.20100524-9), splashy (<< 0.3.13-5.1+b1), sysklogd (<< 1.5-6.2), util-linux (<< 2.20.1-5), wpasupplicant (<< 0.7.3-4), xymon (<< 4.3.0~beta2.dfsg-9)
Conflicts: libdevmapper1.02.1 (<< 2:1.02.24-1)
Conffiles:
 /etc/init.d/bootmisc.sh 3ae83f389eeb2ae771136c2c07c772a6
 /etc/init.d/checkfs.sh b5b6bb94392719ce25916f8c25625cee
 /etc/init.d/checkroot.sh b8ebb7101d4e4fa22ebaa71c20562550
 /etc/init.d/checkroot-bootclean.sh d60d34daa99cd43c1114419783a55f52
 /etc/init.d/halt 6ae1b3b1b8198567a5e32116077f12a2
 /etc/init.d/hostname.sh 2180072dbb4e2f42f7ad4df4a2f9888d
 /etc/init.d/killprocs 5e404d35091fab6c4889302736ed4602
 /etc/init.d/mountall.sh 1e27062f2c3bf096d6ff8e5cb1f0e16e
 /etc/init.d/mountall-bootclean.sh 33beff3777f38734e28a4264fe07f90d
 /etc/init.d/mountnfs.sh 8dcb83a5e1fda088a01ac45a5bdc7152
 /etc/init.d/mountnfs-bootclean.sh cb896095daa125e9dd455ad546c7a337
 /etc/init.d/mountdevsubfs.sh 35e2cfb8caad1df7b309eace2f64b13d
 /etc/init.d/mountkernfs.sh 7c20802ea71674341aa9abad7cce5324
 /etc/init.d/ondemand 88514d9c047b32c4ff3cf0042e216bce
 /etc/init.d/rc.local 18cd07959adfa8411ca17fe7c2ec3d96
 /etc/init.d/reboot 1b9db1ef7bfd79b128ef85d5065721a6
 /etc/init.d/sendsigs 8376da0c226dcc989f6829230b1d5b50
 /etc/init.d/single dc13cb373c5c098a8fb95424701373e3
 /etc/init.d/umountfs 0ab44ff137f63cdf553f6ae1f4bd1861
 /etc/init.d/umountnfs.sh 7ed49dd49c3ea516df80e7bacc0935f2
 /etc/init.d/umountroot 677b1eb8358469b50044663bfbee5699
 /etc/init.d/urandom e6454386bfce38efb5987dd06cb3b21d
 /etc/default/devpts fc857c5ac5fb84d80720ed4d1c624f6e
 /etc/default/halt 18d9844cf8ca8608e2a559a4555e593a
 /etc/default/rcS db3696fc6caa33a1d72b33fa3cec7c42
Description: scripts for initializing and shutting down the system
 The scripts in this package initialize a standard Debian
 system at boot time and shut it down at halt or reboot time.
Homepage: http://savannah.nongnu.org/projects/sysvinit
Original-Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>

Package: libacl1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 79
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: same
Source: acl
Version: 2.2.52-2
Depends: libattr1 (>= 1:2.4.46-8), libc6 (>= 2.4)
Pre-Depends: multiarch-support
Conflicts: acl (<< 2.0.0), libacl1-kerberos4kth
Description: Access control list shared library
 This package contains the libacl.so dynamic library containing
 the POSIX 1003.1e draft standard 17 functions for manipulating
 access control lists.
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Homepage: http://savannah.nongnu.org/projects/acl/

Package: ncurses-bin
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 800
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: foreign
Source: ncurses
Version: 5.9+20140712-2ubuntu2
Pre-Depends: libc6 (>= 2.4), libtinfo5 (>= 5.9+20130119)
Description: terminal-related programs and man pages
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the programs used for manipulating the terminfo
 database and individual terminfo entries, as well as some programs for
 resetting terminals and such.
Homepage: http://invisible-island.net/ncurses/
Original-Maintainer: Craig Small <csmall@debian.org>

Package: libslang2
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 1536
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: same
Source: slang2
Version: 2.3.0-2ubuntu1
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Recommends: libpng12-0
Description: S-Lang programming library - runtime version
 S-Lang is a C programmer's library that includes routines for the rapid
 development of sophisticated, user friendly, multi-platform applications.
 .
 This package contains only the shared library libslang.so.* and copyright
 information. It is only necessary for programs that use this library (such
 as jed and slrn). If you plan on doing development with S-Lang, you will
 need the companion -dev package as well.
Built-Using: unicode-data (= 7.0-2)
Homepage: http://www.jedsoft.org/slang/
Original-Maintainer: Alastair McKinstry <mckinstry@debian.org>

Package: libapt-pkg4.12
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 3187
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: same
Source: apt
Version: 1.0.9.7ubuntu4
Depends: libbz2-1.0, libc6 (>= 2.15), libgcc1 (>= 1:4.2.1), liblzma5 (>= 5.1.1alpha+20120614), libstdc++6 (>= 4.9), zlib1g (>= 1:1.2.3.4)
Pre-Depends: multiarch-support
Breaks: apt (<< 0.9.4~), libapt-inst1.5 (<< 0.9.9~)
Description: package management runtime library
 This library provides the common functionality for searching and
 managing packages as well as information about packages.
 Higher-level package managers can depend upon this library.
 .
 This includes:
  * retrieval of information about packages from multiple sources
  * retrieval of packages and all dependent packages
    needed to satisfy a request either through an internal
    solver or by interfacing with an external one
  * authenticating the sources and validating the retrieved data
  * installation and removal of packages in the system
  * providing different transports to retrieve data over cdrom, ftp,
    http, rsh as well as an interface to add more transports like
    https (apt-transport-https) and debtorrent (apt-transport-debtorrent).
Original-Maintainer: APT Development Team <deity@lists.debian.org>

Package: libusb-0.1-4
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 81
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: same
Source: libusb
Version: 2:0.1.12-25
Replaces: libusb-dev (<< 2:0.1.12-25)
Depends: libc6 (>= 2.15)
Pre-Depends: multiarch-support
Description: userspace USB programming library
 Library for programming USB applications without the knowledge
 of Linux kernel internals.
Original-Maintainer: Aurelien Jarno <aurel32@debian.org>
Homepage: http://www.linux-usb.org/

Package: locales
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 9160
Maintainer: Martin Pitt <martin.pitt@ubuntu.com>
Architecture: all
Source: langpack-locales
Version: 2.13+git20120306-19
Replaces: base-config, belocs-locale-data, belocs-locales-bin, libc6 (<< 2.3.6-0ubuntu6), libc6.1 (<< 2.3.6-0ubuntu6)
Depends: libc6 (>= 2.9-0ubuntu10) | libc6.1 (>= 2.9-0ubuntu10)
Conflicts: base-config, belocs-locale-data
Conffiles:
 /etc/locale.alias 6ac3cbee43012440edc6bcbade0a61ce
Description: common files for locale support
 This package provides support for localized environments (locales).
 It installs character and transliteration maps, provides the POSIX
 locale definition and provides common scripts for language pack
 handling.
 .
 The actual locale definitions are not part of this package, these are
 shipped in the language packs and are installed and removed
 automatically.

Package: libsepol1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 342
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: same
Source: libsepol
Version: 2.3-2
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: SELinux library for manipulating binary security policies
 Security-enhanced Linux is a patch of the Linux kernel and a number
 of utilities with enhanced security functionality designed to add
 mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement®, Role-based Access
 Control, and Multi-level Security.
 .
 libsepol provides an API for the manipulation of SELinux binary policies.
 It is used by checkpolicy (the policy compiler) and similar tools, as well
 as by programs like load_policy that need to perform specific transformations
 on binary policies such as customizing policy boolean settings.
Original-Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Homepage: http://userspace.selinuxproject.org/

Package: ubuntu-keyring
Status: install ok installed
Priority: important
Section: misc
Installed-Size: 46
Maintainer: Michael Vogt <michael.vogt@canonical.com>
Architecture: all
Multi-Arch: foreign
Version: 2012.05.19
Recommends: gpgv
Description: GnuPG keys of the Ubuntu archive
 The Ubuntu project digitally signs its Release files. This package
 contains the archive keys used for that.

Package: libgcc1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 110
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: same
Source: gccgo-5 (5.1~rc1-0ubuntu1)
Version: 1:5.1~rc1-0ubuntu1
Depends: gcc-5-base (= 5.1~rc1-0ubuntu1), libc6 (>= 2.2.4)
Pre-Depends: multiarch-support
Breaks: gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2)
Description: GCC support library
 Shared version of the support library, a library of internal subroutines
 that GCC uses to overcome shortcomings of particular machines, or
 special needs for some languages.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: libreadline6
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 389
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: same
Source: readline6
Version: 6.3-8ubuntu1
Depends: readline-common, libc6 (>= 2.15), libtinfo5
Pre-Depends: multiarch-support
Description: GNU readline and history libraries, run-time libraries
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: util-linux
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 6032
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: foreign
Version: 2.25.2-4ubuntu2
Replaces: bash-completion (<< 1:2.1-3)
Depends: initscripts, lsb-base (>= 4.1+Debian11ubuntu7), tzdata (>= 2006c-2)
Pre-Depends: libblkid1 (>= 2.25), libc6 (>= 2.15), libmount1 (>= 2.25), libncurses5 (>= 5.5-5~), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), libslang2 (>= 2.2.4), libsmartcols1 (>= 2.25), libtinfo5, libudev1 (>= 183), libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4)
Suggests: dosfstools, kbd | console-tools, util-linux-locales
Breaks: bash-completion (<< 1:2.1-3)
Conffiles:
 /etc/cron.weekly/fstrim 8c720b8db851b9038137e08ab8c51b65
 /etc/init.d/hwclock.sh b5ca46c0c11ace2a1e40217c29646bf2
 /etc/init/hwclock-save.conf 4a002046525e338fc23e4418602865c9
 /etc/init/hwclock.conf 132aa3db7e5a8cf55168e4866052208a
 /etc/init/hwclock.sh.conf 55a27396b54021d912e15dbf394a31a3
 /etc/pam.d/runuser b8b44b045259525e0fae9e38fdb2aeeb
 /etc/pam.d/runuser-l 2106ea05877e8913f34b2c77fa02be45
Description: Miscellaneous system utilities
 This package contains a number of important utilities, most of which
 are oriented towards maintenance of your system.  Some of the more
 important utilities included in this package allow you to partition
 your hard disk, view kernel messages, and create new filesystems.
Original-Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>

Package: gcc-5-base
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 79
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: same
Source: gccgo-5
Version: 5.1~rc1-0ubuntu1
Breaks: gcc-4.4-base (<< 4.4.7), gcc-4.7-base (<< 4.7.3), gcj-4.4-base (<< 4.4.6-9~), gcj-4.6-base (<< 4.6.1-4~), gnat-4.4-base (<< 4.4.6-3~), gnat-4.6 (<< 4.6.1-5~)
Description: GCC, the GNU Compiler Collection (base package)
 This package contains files common to all languages and libraries
 contained in the GNU Compiler Collection (GCC).
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: libustr-1.0-1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 257
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: same
Source: ustr
Version: 1.0.4-3ubuntu2
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: Micro string library: shared library
 ustr (Micro string library) is a string API for C. It has tiny overhead over
 just plain strdup(), is much safer, is easier to use, is faster for many
 operations, can be used with read-only or automatically allocated data. You
 don't even need to link to the library to use it (so there are no
 dependencies).
 .
 This package contains the shared library for ustr.
Homepage: http://www.and.org/ustr/
Original-Maintainer: Vaclav Ovsik <vaclav.ovsik@i.cz>

Package: sed
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 308
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: foreign
Version: 4.2.2-4ubuntu1
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.7), libselinux1 (>= 1.32)
Description: The GNU sed stream editor
 sed reads the specified files or the standard input if no
 files are specified, makes editing changes according to a
 list of commands, and writes the results to the standard
 output.
Homepage: http://www.gnu.org/software/sed/
Original-Maintainer: Clint Adams <clint@debian.org>

Package: libsmartcols1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 368
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Multi-Arch: same
Source: util-linux
Version: 2.25.2-4ubuntu2
Depends: libc6 (>= 2.17)
Pre-Depends: multiarch-support
Description: smart column output alignment library
 The smart column output alignment library, used by fdisk utilities.
Original-Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>

Package: libcryptsetup4
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 272
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: powerpc
Source: cryptsetup
Version: 2:1.6.1-1ubuntu7
Depends: libc6 (>= 2.15), libdevmapper1.02.1 (>= 2:1.02.90), libgcrypt20 (>= 1.6.1), libuuid1 (>= 2.16), libgpg-error0 (>= 1.10-0.1)
Description: disk encryption support - shared library
 Cryptsetup provides an interface for configuring encryption on block
 devices (such as /home or swap partitions), using the Linux kernel
 device mapper target dm-crypt. It features integrated Linux Unified Key
 Setup (LUKS) support.
 .
 This package provides the libcryptsetup shared library.
Homepage: http://code.google.com/p/cryptsetup/
Original-Maintainer: Debian Cryptsetup Team <pkg-cryptsetup-devel@lists.alioth.debian.org>

